NTC thermistor

 
NTC thermistor

What are NTC thermistors? NTC stands for “Negative Temperature Coefficient”. NTC thermistors are resistors with a negative temperature coefficient, which means that the resistance decreases with increasing temperature. They are primarily used as resistive temperature sensors and current-limiting devices. The temperature sensitivity coefficient is about five times greater than that of silicon temperature sensors (silistors) and about ten times greater than those of resistance temperature detectors (RTDs). NTC sensors are typically used in a range from −55°C to 200°C. The non-linearity of the relationship between resistance and temperature exhibited by NTC resistors posed a great challenge when using analog circuits to accurately measure temperature, but rapid development of digital circuits solved that problem enabling computation of precise values by interpolating lookup tables or by solving equations which approximate a typical NTC curve. NTC thermistor definition An NTC thermistor is a thermally sensitive resistor whose resistance exhibits a large, precise and predictable decrease as the core temperature of the resistor increases over the operating temperature range.  Characteristics of NTC thermistors Unlike RTDs (Resistance Temperature Detectors), which are made from metals, NTC thermistors are generally made of ceramics or polymers. Different materials used result in different temperature responses, as well as other characteristics. Temperature response While most NTC thermistors are typically suitable for use within a temperature range between −55°C and 200°C, where they give their most precise readings, there are special families of NTC thermistors that can be used at temperatures approaching absolute zero (-273.15°C) as well as those specifically designed for use above 150°C. The temperature sensitivity of an NTC sensor is expressed as “percentage change per degree C”. Depending on the materials used and the specifics of the production process, the typical values of temperature sensitivities range from -3% to -6% per °C. As can be seen from the figure, the [… read more]

Thermistor

 
Thermistor

What is a thermistor? A thermistor is a temperature sensitive resistor, they are often used as a temperature sensor. The term thermistor is a contraction of the words “thermal” and “resistor”.  All resistors have some dependency on temperature, which is described by their temperature coefficient. In most cases for (fixed or variable) resistors the temperature coefficient is minimized, but in the case of thermistors a high coefficient is achieved. Unlike most other resistors, thermistors usually have negative temperature coefficients (NTC) which means the resistance decreases as the temperature increases. These types are called NTC thermistors. Thermal resistors with a positive temperature coefficient are called PTC thermistors (Positive Temperature Coefficient). Thermistor definition A resistor whose resistance changes significantly with a change in temperature. Types and applications Thermistors are ceramic semiconductors. In most cases they are composed of metal oxides, which are dried and sintered to obtain the desired form factor. The types of oxides and additives determine their characteristic behavior. For NTC’s cobalt, nickel, iron, copper or manganese are common oxides. For PTC’s barium, strontium or lead titanates are commonly used. NTC thermistor The NTC type is used when a change in resistance over a wide temperature range is required. They are often used as temperature sensors in the range of -55°C to 200°C, although they can be produced to measure much lower of higher temperatures. Their popularity can be accounted to their quick response, reliability, robustness and low price. PTC thermistor The PTC type used when a sudden change in resistance at a certain temperature is required. They exhibit a sudden increase in resistance above a defined temperature, called the switch, transition of “Curie” temperature. The most common switching temperatures are in the range of 60°C to 120°C. They are often used for self-regulating heating elements and self-resetting over-current protection. [… read more]